Question 10029 of 871 · Maryland Journeyperson Electrician Exam
A copper ring or grid used for pool perimeter bonding is installed at what depth?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 10029
- A: 4 to 6 in below the subgrade
Explanation
The copper conductor alternative for perimeter bonding is placed between 4 in and 6 in below the subgrade. This keeps it close enough to the surface to equalize potential under bare feet.
More questions: Special Equipment, Pools, PV and EV
- 10030For conductive pool shells, perimeter surface bonding must attach to the structural reinforcing steel or copper grid at a minimum of how many points?
- 10031Pool water must be bonded by a conductive surface in contact with the water of at least what area?
- 10032Metal parts such as fences or railings must be bonded when within what distance of the inside walls of a pool, unless separated by a permanent barrier?
- 10033A commercial spa requires an emergency shutoff for the recirculation and jet system. Where must it be installed?
- 10035What protection is required for the outlet supplying a self-contained outdoor spa or hot tub?
- 10036How must a hydromassage bathtub be supplied?