Maryland Journeyperson Electrician Exam, Emergency, Limited Energy and Communications: all 25 questions

All questions from the Emergency, Limited Energy and Communications section for Maryland Journeyperson Electrician Exam, each with the correct answer.

• 11001Upon failure of the normal supply, emergency system power must be available within what time?
• 11002Upon failure of the normal supply, a legally required standby system must have power available within what time?
• 11003Which type of alternate power system has no NEC-specified maximum time for power to be restored?
• 11004How must emergency system wiring generally be installed in relation to other wiring?
• 11005What type of transfer equipment is required for an emergency system?
• 11009How must emergency lighting systems be designed with respect to lamp failure?
• 11010Where on-site emergency power sources are installed, a sign must be placed where?
• 11011Which record must be kept for an emergency system?
• 11013In assembly occupancies for more than 1000 persons or buildings above 75 ft in height, emergency feeder circuit wiring must have what protection?
• 11014In NEC 2020 and 2023, which article covers fire-resistive cable systems?
• 11016Egress lighting required by a building code to illuminate exit paths during a power outage is part of which system?
• 11017A code-required system supplies sewage disposal pumps and smoke removal equipment during outages, with less urgency than egress lighting. Which system is this?
• 11018A portable generator is connected to a dwelling's premises wiring as an optional standby source. What is required?
• 11019In NEC 2020 and 2023, which article covers energy management systems?
• 11023May Class 2 conductors be installed in the same raceway as power conductors?
• 11025In NEC 2020, a Class 1 power-limited circuit is supplied by a source with an output not exceeding what?
• 11026In NEC 2020, Class 1 remote-control and signaling circuits that are not power-limited may operate at up to what voltage?
• 11027In NEC 2020, which article covers Class 1, Class 2, and Class 3 remote-control, signaling, and power-limited circuits?
• 11030In NEC 2020, what is the maximum OCPD for 18 AWG Class 1 circuit conductors?
• 11032What identification is required on the disconnecting means for a fire alarm branch circuit?
• 11033Which power-limited fire alarm cable type is suitable for installation in plenums?
• 11034What does the NEC require for the accessible portion of abandoned fire alarm cable?
• 11035Where must fire alarm circuits be identified?
• 11037In NEC 2020 and 2023, which article covers optical fiber cables and raceways?
• 11042In NEC 2020 and 2023, which article covers communications circuits such as telephone wiring?

More topics

• Definitions, Theory and Plans115 questions
• Services and Service Equipment49 questions
• Feeders and Overcurrent Protection47 questions
• Branch Circuits, GFCI and AFCI74 questions
• Grounding and Bonding59 questions
• Wiring Methods, Conductors and Boxes52 questions
• Equipment, Devices and Luminaires48 questions
• Motors, HVAC, Generators and Transformers59 questions
• Special Occupancies28 questions
• Special Equipment, Pools, PV and EV44 questions
• Load Calculations29 questions
• Electrical Calculations120 questions